Rug Cleaning, Bend Oregon

Rug Cleaning

Sometimes vacuuming just is not enough to get the job done, and the assistance of a rug cleaning specialist is necessary. Carpet can muffle sound, prevent slipping and collect the soil and debris that would otherwise get tracked through the house. Maintaining its durability through thorough tidying is a way to ensure long lasting usefulness.

Finding someone reliable to perform a professional cleaning is not difficult when one knows what to look for. When searching for a reputable business to trust, it is important to look for one that has been operating for a number of years. This is not to say that a new business is incapable of providing quality work, but someone with a history in the field is far more likely to have the necessary skills. Obtaining information on a business that has been around for years will be easier, because they’ve had the opportunity to be critiqued by more customers. Online recommendations are helpful when deciding on a rug cleaning service, because they provide proof of excellent customer service and a job that has been satisfactorily done. While not necessary, picking a business that specializes in more than cleaning has its benefits. A company that is well versed in restoration and repair has a clear idea of how the rug should look, as well as how it is made, and all of that knowledge can be applied when inspecting and treating it. A professional business is also more likely to have the machines, soap solutions and techniques that result in a complete laundering.

A professional rug cleaning serves the purpose of removing stains, dirt, odors and allergens. There are a few different methods of achieving this, but the most common is composed of a few steps. First, remove items that are small and fragile from pieces of furniture that will need to be moved. A crew will do all the heavy lifting, but can operate more quickly and efficiently without clutter. A pre-inspection will reveal if there are any permanent stains and allow the employees to determine rug construction and materials. Jute, a natural fiber that used to be employed as a backing is known to shrink when wet, so an inspection is an important part of the process. A thorough vacuuming of the area will then be done to remove debris. Afterwards, a pre-spray and spot treatment will be applied before a machine-mounted hot water extraction is performed.  The hot water extraction sprays water that has its heat and pressure carefully regulated to prevent floor coverings from getting sopping wet. This method flushes the carpet with a diluted cleaning agent that removes bonded dirt and grit. The hot water extraction machine sucks up the water immediately after spraying it, and this is performed front to back. Afterwards, there is a post-spot treatment to tend to any trouble spots. Then the floor covering is raked to encourage faster drying and to be more aesthetically pleasing.

A rug cleaning that will restore floor coverings to their former softness and vibrance is not a do-it-yourself task, but a job for a professional. Only through hiring a professional can the best, most effective and safest rug cleaning solutions and methods be guaranteed.

Professional Carpet Cleaning – Bend Oregon

Comparing carpet cleaning corporations may be difficult, and it boils down to greater than just commercial carpet cleaning rates. Specialist carpet cleaning implies the firm shows up on time having a extremely specialist appearance, disturbs absolutely nothing, and does a high-quality experienced cleaning. You do not want a commercial carpet cleaning organization that gets noticed; you wish a single whose cleaning job gets noticed, and within a very good way. You need invisible perfection.

Guarantee Industrial Steam cleaning crews are trained to become as close to invisible as you possibly can. Consequently, our customers trust us in hugely sensitive environments with really sensitive data and gear. We show up quietly, do our jobs in a quiet professional manner, and leave behind a sparkling clean environment!

Whether that you are straight contracting using a carpet steamer corporation, or are subcontracting industrial carpet cleaning, the professionalism of the carpet and upholstery cleaning contractor is vital. At Industrial Steam Group our commercial carpet cleaning teams are trained to think that you’re probably the most important particular person on website; and that your job should be as pleasant as you can.

Comparing Carpet Cleaning Companies
Any time you are comparing carpet cleaning companies, our commercial carpet cleaning rates are amongst the very best. That’s as a consequence of quite a few aspects, not the least of which is that our hugely trained professional employees is non-union. We also are certainly not a franchise, and as a result we usually do not have to have to pay franchise fees back to a parent company.

Furthermore, our employees are all college-educated experts, each and every hand-picked from referrals. As a family-owned and run organization, we treat our staff as element of our household. Due to the fact of this, for the reason that they are professionals, and simply because we deliver them with highest excellent instruction you may count on their reliability and trustworthiness.

Commercial Carpet Cleaning All through the Bend, OR
If your business enterprise wants industrial carpet cleaning in Minnesota, Commercial Steam Team serves consumers inside thirty miles in the Central Oregon metro area. Whether or not you’re seeking experienced carpet cleaning in Bend, Or, Redmond, OR, and everywhere in involving – we’ve got you covered.

All Seasons Carpet Cleaning
Quite a few firms have a tendency to neglect about carpet cleaning till the springtime, when mud starts to seem and reminds them to clean the carpets. Waiting that long to clean your carpets is usually a pricey error.

Particularly through the winter, chemical buildup in carpets can lead to harm to computer electronics, especially in case you are dry vacuuming and wellness hazards to staff. De-icing compounds such as magnesium chloride can contribute to computer malfunctions and potassium acetate can incite gastrointestinal challenges and hyperkalemia.

Additionally, the longer that chemicals sit inside your carpet the extra likely they may be to bond with fibers in the carpet or with other chemical substances. In some circumstances this might result in permanent damage to your carpet.

Regardless of season, other concerns can come into play year-round. In case your corporation makes it possible for pets in to the facility you could want a industrial carpet cleaner to remove pet stains ahead of they become ground in or scrubbed into the carpet. Even though your environment is pet no cost, dog feces and also other undesirable items can nevertheless be tracked in around the footwear of workers and visitors, resulting in unsightly stains, unpleasant odors, and the development of bacteria.

An excellent year-round carpet upkeep plan is usually a cost-effective method to help alleviate these difficulties and boost the life of the carpets.

3 Home Health Benefits To Carpet Cleaning, Bend OR

Carpet cleaning can increase the look of the dwelling and extend the life of your carpet, but probably one of the most beneficial advantage from the method is enhancing you and your family’s overall health. In line with the American Lung Association, if members of your household endure from conditions which will impact their breathing, for example snoring or asthma, it’s especially vital that you simply vacuum your carpets at least 3 occasions per week. Beyond vacuuming regularly, you might also benefit from obtaining your carpets professionally cleaned a minimum of once a year. If you are not fully convinced of the advantages of specialist carpet cleaning, think about the following prime 3 methods the approach leads to a healthier property:

1. Carpet cleaning eliminates trapped pollutants.

According to the Environmental Protection Agency, a dirty carpet can retain numerous sources of indoor air pollutants, like pet dander, cockroach allergens, lead, particle pollution, and daily dirt and dust. Toxic airborne gases can adhere to these particles as well as get trapped within the carpet. These toxic gases is usually released via each day activities for example vacuuming and walking across the carpet, which can cause them to contaminate the air inside your house. Skilled carpet cleaning services kills these bacteria by means of specific shampooing formulas and may remove deeply trapped pollutants with high-powered vacuums.

two. Carpet cleaning can clear out dust mite infestations.

Many properties have dust mite infestations, but most homeowners are not conscious from the infestation, because the creatures are microscopic. Dust mites themselves aren’t allergens, but they generally leave behind feces and physique fragments that are. Because of the microscopic size of these particles, they can quickly be inhaled when the region is disturbed, which can exacerbate allergies. A lot of expert carpet cleaning companies utilize a approach referred to as steam cleaning when performing carpet upkeep perform, which exposes your carpet to high temperatures that dust mites can’t survive.

7 Lessons from a Professional Carpet Cleaner, Bend OR


Brandon Cleary of Pristine Orientals  Photo: Cris CarlNo matter how clean we think we keep our home, sooner or later carpet cleaning is a necessity. If you have any type of carpeting in your home, whether wall-to-wall or area rugs, deep cleaning is a good idea every 12 to 18 months. You best bet is to hire a professional. Not all professional carpet cleaners are alike, however. Don’t be swayed by print or television ads that offer super cheap prices. Many of these “companies” are fly-by-night, or offer sub-standard work. And while you may like to do-it-yourself, rental carpet cleaners are the fast food version of carpet cleaning.

You should always get an in-home inspection and written total price quote. Over the phone quotes cannot possibly take into account your particulars. Everyone has their own situation whether they have young children, pets, hobbies that can be messy; you entertain a lot, etc. The job really needs to be seen.

Dennis Cleary, owner of Pristine Orientals in Greenfield, MA, offered a number of recommendations for the average homeowner.

Who is really qualified to do the best job?

Cleary recommends hiring companies that have employees with IICRC (Institute of Inspection, Cleaning, and Restoration Certification) training. “There are 25 different categories of classes involved in the training,” said Cleary.

If you have wall-to-wall carpets:

Cleary said that most wall-to-wall carpets are made from nylon or polypropylene threads (basically plastic). “Wall-to-wall is essentially attached to the building, so you can only clean the top,” said Cleary.

First of all, the carpets need to be intensely vacuumed (and not just with your Hoover). “Otherwise it’s like trying to clean a carpet filled with mud,” said Cleary.

Cleary recommends the use of companies, such as his own, which employ the use of specialized “mounted” trucks that offer “a more powerful and efficient freshwater and recovery system.” Cleary’s trucks have specialized hoses, wands, and vacuums that are snaked into the home or office. Carpets are dye tested in spots to be certain cleaning soaps and chemicals will not damage the carpets. Hot water is generated in the truck and sprayed along with soap on the carpets. The rugs are “raked” to work in the soap and loosen dirt, the carpets are rinsed again with hot water and the resulting dirty water is extracted by powerful vacuums. Most carpet cleaning jobs done by professionals (unless your home is enormous) will take roughly 2 ½ hours for the work and 2-3 hours drying time. Most companies don’t charge for furniture moving. Also, don’t put your furniture back too soon, as wood may become damaged or you may end up with rust stains from any metal furniture. If you can, during the cleaning, leave a few windows open or put the heat on a little higher to speed the drying process along.

Cleary dusting the carpet.  Photo: Cris Carl

Area rugs and Oriental carpets:

After an in-house inspection, carpets are best removed to be professionally cleaned at a plant. Expect the cleaning to take at least five days. Cleary said to beware of companies that claim to clean your rugs in hours. “They put the rugs through a machine that looks like a printing press. The rugs are run through rollers and cleaned a bit like a car wash. The whole process only takes minutes.”

Oriental and many types of area rugs are more often made of wool, wool blends, cotton, sisal, rayon and other natural fibers. The in-plant process starts with “dusting” the rug with compressed air to remove loose dirt. Dye tests are done, and then the rug is soaked overnight. Cleary said to avoid companies who say they can clean area rugs and Oriental carpets in your home. “It’s like trying to wash your clothes while still wearing them,” said Cleary. The second day the rug is soaked in warm soapy water. Lower water temperatures are used due to the type of fibers. Wall-to-wall carpets, since they can’t be removed for cleaning and are more often synthetic fibers can withstand much higher water temperatures. Milder soaps are also used. The rug is left in the soapy solution until day three, at which point the rug is flushed with compressed air and water and hung to dry. Cleary said that in-plant cleaning assures optimal control of temperatures and the drying process. Finally, the fringe is cleaned and any specialized work such as repairs, deodorizing, moth-proofing, removal of gum or wax etc. is done.

Regarding pet stains:

Another case for professional carpet cleaning is what happens when your pets have “accidents” on the carpet. You may think you’ve cleaned the mess up, but often ammonium salts are left behind. During the winter, if your home is dry, you may not notice much in the way of odor as the salts remain crystallized. However, once the warmer, wetter months arrive, the salts absorb moisture and release more odor.

Chemicals and soaps that are used:

Cleary said that only for wall-to-wall carpeting are stronger chemicals and soaps used. If you have chemical sensitivities, discuss what the company uses and how to lessen the effects. Cleary said that they use fairly neutral products regarding Ph, but some wall-to-wall rugs with heavy soiling might require more alkaline soaps or cleaners.

An Owner’s Guide To Rug and Carpet Care, Bend OR

MARTHA STEWART LIVING, NOVEMBER 2002

You’ll be surprised to learn how much dirt vacuums miss — and how simple the best cleaning methods really are.

The pitch was simple. In the 1950s, a vacuum salesman would come to the door, spill dirt on the carpet, and ask the lady of the house to clean it with her machine. Then he would load a fresh bag into his model, run it over the “clean” carpet, and open the bag to reveal what it had picked up. Frequently that was all he needed to close the deal. Had the salesman reversed the order, however, using his machine first, the results might have been the same. Often the problem wasn’t the old vacuum. It was the fact that once dirt goes into carpet, it doesn’t easily come out.

Keeping Clean
Limit how much dirt gets into carpets in the first place. Declare a shoes-off rule, or place sturdy doormats at all entries.

Frequent vacuuming is the only way to keep grit from becoming embedded. Having a vacuum that’s easy to use is crucial. Spend the bulk of cleaning time where dirt collects: a dozen passes of the vacuum within 4 feet of outside doors, eight passes in high-traffic areas, and four passes elsewhere. Where carpets have not been regularly and thoroughly cleaned, double the passes for three months.

The safest, easiest, and most effective deep-cleaning solution for area rugs is to have them rolled up and taken away for cleaning. With wall-to-wall carpeting, truck-mounted, hot-water extraction — or steam cleaning — works best. Cleaning rugs or carpets yourself with a rented extraction machine is fine as long as you don’t leave the carpet too wet and don’t use too much cleaner.

Key Concepts for Spot-Cleaning
Blot
Trying to rub out a stain just pushes the spill into the pile and causes fibers to mat. Instead, blot up spills by covering the area with a clean towel or a thick pad of paper towels. Press down with the heel of your hand. Repeat using dry towels until all the liquid has been absorbed. If the spill is large, use a wet-dry vacuum (if available) to remove most of the material before blotting.

Soapy Water
Mix your own spot-cleaning solution by diluting a few drops of clear hand-dishwashing soap in water. (Laundry detergent is too alkaline, and creamy-looking hand-dishwashing soaps may leave a sticky residue.) Use less than 1/4 teaspoon per quart.

Rinse
To remove colored spills or spot-cleaning solutions, such as soapy water or vinegar, either mist the area with clean water, or blot it with a wet towel. Then blot area with a dry towel. Repeat these two steps until no more residue comes out. Do not rub, or the carpet fibers may become matted.

Out of the Carpet and Into the Air
The dust that collects in carpets may contribute to health problems — particularly asthma, the most common chronic disease among children. Many vacuums worsen the problem by sending that dust shooting into the air, but a relatively new breed uses HEPA (high efficiency particle arresting) filters to trap essentially all of it in the machine.

When the Carpet and Rug Institute, a trade group, tested vacuums’ effect on air quality, it found that just having a HEPA filter doesn’t necessarily mean the machine is a clean one. The beater brush may still stir up dirt that becomes airborne. To be awarded the group’s “green label” a vacuum cannot cause dust in the air to exceed 100 micrograms per cubic meter — ess than the amount of dust a person generates by scratching his head a few times.

How to Clean Your Carpets
Carpet Type: Synthetic 
Routine Care: Vacuuming — Remove grit with multiple passes in varying directions. Use the beater brush, set to the pile height. Change bag when one-half full because efficiency decreases after that. Liquid Spills — Clean promptly, using the blot technique described below. If the area discolors, there’s probably a sticky spill residue that has trapped soil. Clean by misting with warm water and blotting.
Deep Cleaning on Your Own: Professional steam cleaning works best on wall-to-wall carpeting and may be required by the warranty. If you want to do it yourself, vacuum thoroughly, then use an extraction machine from a rental company (supermarket models are less powerful). Test cleaning solution by pouring a few drops into a saucer and allowing to evaporate (a hair drier speeds the process). If the dried residue in the saucer remains sticky, switch cleaners. Use fans or air-conditioning to dry carpet. Area rugs can be cleaned using the same methods.

Carpet Type: Wool
Routine Cleaning: Vacuuming — Follow the instructions above, but avoid using a rotary brush on loop-pile (Berber) carpets; the yarn may fuzz. Instead, use a floor tool. Liquid Spills — Clean by misting with water and blotting, as for synthetic carpets. Never use ammonia or any other highly alkaline cleaner, which can damage wool.
Deep-Cleaning On Your Own: For both area rugs and wall-to-wall carpets, home cleaning is not recommended because wool fibers absorb more water than synthetic fibers do. This makes them hard to dry, and area carpets become very heavy and difficult to maneuver. Plus, a lot of the available cleaners are too alkaline. Many of today’s carpets, however — even Oriental-style ones — are actually made from synthetic fibers. To test for wool, snip a strand, and hold a lit match to it; burning wool smells like burned hair.

Carpet Type: Plant
Routine Cleaning: Vacumming — Use the same technique as for synthetic carpets. A beater brush is the best way to remove grit, which causes excessive wear on these carpets. Liquid Spills — Plant fibers are less stain-resistant than synthetics or wool, even if they have been treated with a water repellent, so blot spills promptly, following instructions below. Make sure damp areas dry quickly by using a fan or a hair drier (set on low heat).
Deep Cleaning On Your Own Manufacturers recommend the use of dry methods only. Leave that to a professional.

 

Removing Stains
Some commercial spot removers take off the protective coatings or break down dyes that are found on most carpets, but the remedies listed here do not. Note: Be sure to follow the instructions for spot-cleaning, “blot,” “soapy water,” and “rinse.”

Stain Type: Organic blood, berries, candy, chocolate, soft drinks/coffee, gravy, ice cream.
Cleaner: Hydrogen Peroxide bleaches these stains without breaking down carpet dyes.
Mix: Buy 3 percent solution at a drugstore and use full strength.
Technique: Scoop up solids with a spoon. Blot liquids. Rinse repeatedly. If stain persists, use soapy water, then rinse. Repeat. If improvement stops, dab on hydrogen peroxide. Wait one hour. Repeat as needed.
Mud: Allow spill to dry. Break off pieces and vacuum. Rinse with soapy water. Go to hydrogen peroxide if needed.

Stain Type: Alkaline cat urine, beer.
Cleaner: White Vinegar, a mild acid, neutralizes alkaline spills.
Mix: 1 cup white vinegar in 1 cup water.
Technique: Blot up spill and rinse. If stain persists, use soapy water, then rinse. Repeat until spot is gone; if stain persists, apply vinegar solution with a spray bottle or a saturated towel. Blot with a dry towel; rinse. If stain persists, repeat.

Stain Type: Acidic ketchup, cough syrup, mixed drinks, soy sauce, watercolor paint.
Cleaner: Ammonia, an alkali, neutralizes acidic spills.
Mix: 1 tablespoon in 1/2 cup water.
Note: Never use on wool; it can destroy the fibers. Instead, dilute spill with plain water.
Technique: Blot up liquid spills. Scrape off solids with a spoon or knife. Apply ammonia solution with a spray bottle or a saturated towel. Blot out excess with dry towel. Rinse. If stain persists, use soapy water and rinse. Repeat until improvement stops. If stain persists, use hydrogen peroxide. See instructions above.
Caution: Ammonia is toxic. Use good ventilation.

Stain Type: Oily/Waxy asphalt and tar, wax and crayon, metal polish, grease, hand lotion, ballpoint ink, makeup.
Cleaner: Rubbing Alcohol, a mild “dry-cleaner,” dissolves oily or waxy materials and is much safer than solvents in commercial spot removers.
Mix: Use full strength from bottle. Do not let it puddle; it may destroy the carpet backing.
Technique: Blot up or scrape off as much as possible (then, for wax, cover area with a brown paper towel, and transfer the wax by ironing on warm). Apply rubbing alcohol with a towel or cotton ball. For deep stains, blot with a clean towel, and repeat until towel remains clean. If spill is on the carpet tips, work material out by gently rubbing in one direction rather than blotting, which might drive the stain deeper. If stain persists, blot with soapy water and rinse; repeat. If needed, switch to hydrogen peroxide, as detailed above.

Stain Type: Chemically Reactive Acidic toilet-bowl cleaners, acne medication, lye-based drain cleaners, chlorine bleach, hair dye, iodine, insecticides, mustard with turmeric, plant fertilizers
Cleaner: Stain is permanent. For wall-to-wall carpet, call a professional to cut out the damaged area and patch with carpet from a closet or other hidden area. Alternatively, move furniture or set out pillows to cover stain. With area rugs, rotate so stain is in a less noticeable position.

Stain Type: Special Cases chewing gum, rust, nail polish
Technique: For chewing gum: Freeze with ice cubes. Break off bits, and pick them out. If that doesn’t work, go to a janitorial supply store for a spray that freezes gum instantly and allows you to chip it off. For rust: Apply soapy water. Rinse. Repeat until improvement stops. If stain persists, call a professional who will have access to more powerful cleaners. For nail polish: Dab on non-oily nail-polish remover with a cotton ball. Do not get it on carpet backing. Blot and repeat.

Carpet Cleaning Necessitates-Heavy-duty-Vacuums-Bend OR

Part three of this three-part article looks at other advantages of commercial vacuum cleaners.

End users often will scoff at the price of a commercial vacuum as compared to a consumer vacuum. However, the features on commercial vacuums far outweigh the benefits of consumer machines.

In order to withstand the wear and tear of everyday use, commercial vacuums are designed with durability in mind.

“Commercial vacuums are generally heavier, more heavy-duty and can take more of a beating,” says Griffin. “People are in a bigger hurry in a commercial setting. It’s not as delicate a setting as you’re going to find in a residential market, so they tend to be a little harder on the equipment. They bang into things more. They drop it around, beat it around, throw it around.”

Manufacturers of well-built commercial vacuum cleaners also take into account the amount of time the unit will be in use. An example would be the on/off switch. A good commercial vacuum is built with the knowledge that the switch will be turned on and off as many as 50 times a day, five days a week. A vacuum built for consumer use may only be turned on and off 10 times in a week.

Motors in commercial vacuums are manufactured for more cycles and are meant to be run for extended periods of time when cleaning large spaces. Some commercial machines are even equipped with dual motors — one for the vacuuming, and the other for the agitator brush, lessening the workload for one motor and extending its life.

Another major benefit commercial vacuums have over their consumer counterparts is air flow.

“Commercial units have much higher air flow, which means they pull more soil out of the carpet,” says Smith. “As you’re running it across the carpet, you’re agitating it, you’re pulling that dirt up out of there.”

Filtration is another area where commercial vacuums best consumer vacuums. Commercial vacuums often go through rigorous certification processes to test their filters, ensure they meet the needs of allergy-free environments such as hospitals, remove 99.99 percent of unwanted material from a facility, and ensure that they do not disperse particles into the air.

“With commercial vacs, that dirt is caught in the bag and it’s kept in the bag,” says Smith. “A lot of the cheap vacs exhaust all that dirt right back out into the room. So if you need to have a HEPA filtration, you need to have high-particulate filtering that is available in commercial units.”

Other notable features on commercial vacuums: they have longer cords, weigh less, have larger-capacity filter bags that enable end users to vacuum longer without stopping to empty the bag or container, and have tool kits used for high vacuuming or high dusting — all major productivity enhancers for professional end users.

Cords on commercial machines run 50 feet in length, 30 feet longer than standard consumer machines, so it decreases the need for the end user to plug in and unplug the machine numerous times in a large area.

Handle weight on commercial machines is also a key productivity feature.

“A lot of times, handle weight is a big deal,” says Smith. “Commercial units are designed for someone to use it for longer periods at a time, so manufacturers will design them so that the handle weight isn’t as heavy and you don’t have as much fatigue on the worker.”

Although commercial vacuums are built to outlast their consumer cousins, proper maintenance still should to be taken into consideration.

“It’s just like buying a car. You can buy a $30,000 or $40,000 car, but if you don’t take care of it, it’s a junker in three years,” says Smith. “If you spend the money [on a commercial vacuum], you maintain it, you take care of it, you train your workers on how to use it, it will last a long, long time and give great service. Very few times do any of these units ever just fail. Parts typically will wear out over a period of time, but they don’t just fail.” – See more at: http://www.cleanlink.com/cp/article/Professional-Cleaning-Necessitates-Heavy-duty-Vacuums–19519#sthash.HHB4FT35.dpuf

Focus On Low-moisture Carpet Cleaning, Vacuuming, Bend OR

What are some of the mistakes contributing to these negative impacts? One of the most critical carpet problems is a lack of proper vacuuming, says Yeadon. This oversight can prove especially detrimental when it comes to dry soil removal, since this matter accounts for up to 90 percent of the soil found in carpeting. Dry soil can easily be removed by vacuuming. Skipping this step will only create more work for janitors.

“Once you use water on the carpet, any remaining dry soil becomes mud and is harder to remove,” says Joel Craddock, president of Doc’s Facilities Solutions, Inc., and CEO of Doc’s Facilities Consulting, Inc., both in Rochester, New York. “Additionally, it can potentially build up in the carpet if not fully removed. Companies that skip this step, or clients that reduce the vacuuming schedule, can expect that the carpet won’t stay as clean as a properly maintained carpet.”

Giving vacuuming short shrift won’t make the building service contractor shine either, says Yeadon.

“When vacuuming isn’t done properly, the synthetic fibers can be scratched and abraded, permanently damaging the carpet’s appearance,” he says. “This can’t be fixed and makes it look as if the technician is doing a poor job.”

The problems don’t stop with dry soil removal. There are plenty of other mistakes to be made during more intensive cleaning. One common problem is a janitor using too much soap and not rinsing enough, says Quintis Millsaps, president and CEO of Q’s Cleaning Services, Inc., a South Holland, Illinois-based BSC.

“This can impact the carpeting by constantly attracting soil to the soap residue left in the carpet, which may cause it to look dull,” says Millsaps. “These mistakes can be costly. If a carpet is improperly cleaned it can void the warranty and the contractor may have to replace it.”

The overuse of wet-cleaning, deep-extraction processes can lead to trouble, says Griffin. When done too often, the carpet’s backing can be negatively affected, since the excessive moisture can impact the adhesive on some carpets, causing it to delaminate. Too much moisture can also lead to mold and mildew in the surrounding environment. Additionally, overly wet carpet may result in slips and falls.

Instead of always extracting carpets, low-moisture processes can effectively clean carpets. But these shouldn’t be overused either.

“People need to remember these systems are a surface cleaning and a maintenance process versus a deep cleaning,” says Griffin. “Consequently, the overuse of low-moisture processes can leave a residue buildup over time, which can end up compromising the appearance of the carpet and its lifespan.”

One low-moisture process is encapsulation, which uses a specific kind of detergent to clean. Encapsulation is primarily deployed as an interim cleaning method, says Craddock. One positive is that this process requires very little water compared to typical hot-water extraction methods.

Basically, the detergent encloses the soil in a brittle crystal as the carpeting dries. Craddock says it can take up to 24 hours after the process starts to fully attract and crystallize the dirt, although less time may be required. Once the carpeting dries, vacuuming removes these crystals, taking the soil and dirt with it.

But several factors can undermine the results. One of these, says Griffin, is waiting too long to do the process, trying to clean carpeting that is overly soiled. Not thoroughly vacuuming and removing as much dry soil as possible before beginning encapsulation is another issue.

“Encapsulation can’t dissolve sand and dry soil,” says Griffin. “You want to get the dry stuff out as much as possible, because you want to focus the chemical’s energy on the sticky stuff it can dissolve.”

Another mistake is using encapsulation on the wrong kind of soils. For example, this process may not prove as effective on carpeting typically found in restaurants, movie theaters or factories where there tends to be high levels of greasy soils.

Thoroughly vacuuming after encapsulation is important, says Millsaps, explaining the objective is to remove the dried crystals before they have contact with any moisture, which could cause them to lose their efficacy.

Equipment plays an integral role in the success or failure of the encapsulation process. It’s most effective to use a pile-lift vacuum on the traffic lanes before and after encapsulation, says Griffin. A frequent recommendation is using a dual-motor upright vacuum with a HEPA filter and a paper bag liner to fully remove the dry carpet cleaner, adds Craddock.

“Many companies don’t always have the correct equipment to remove the dry compounds, which can leave residual crystals behind,” says Craddock. “This can cause some minor damage to the fibers if not fully removed over time.” – See more at: http://www.cleanlink.com/cp/article/Focus-On-Low-moisture-Carpet-Cleaning-Vacuuming–20258#sthash.9KLJsPq2.dpuf

Top Carpet Cleaning Mistakes For BSCs, Bend OR

There are plenty of things that can go wrong when it comes to carpet cleaning, but perhaps one of the surest ways to get off on the wrong foot is making the assumption that carpet cleaning is a straightforward service anyone can deliver with little or no training. In fact, Bill Yeadon, training director of Jon-Don, a Roselle, Illinois-based distributor, describes this belief as “the most glaring problem” behind many carpet cleaning mistakes.

“Contract cleaning isn’t a difficult process, but it does require following simple principles and processes,” he says. “One method or one chemical doesn’t take care of all situations.”

A properly trained and educated professional will assess each floor, says Yeadon, selecting the right processes and chemistry based on the needs of that specific area.

In the past, it was common to deploy a more macro strategy, treating all the carpeted surfaces in a building as equal, therefore requiring the same soil removal/cleaning processes and frequency, says Bill Griffin, president of Cleaning Consultant Service, Inc., Seattle. But he says taking a micro perspective is more effective and cost-efficient, since each carpeted surface faces its own set of unique, use-based issues that should dictate the approach.

Inspecting the carpet before cleaning is an important first step. Look for spots, open seams, pulled yarns, stains, damage and severe texture change to the carpeting, says Griffin.

“These problem areas, conditions and issues should be documented in writing and communicated to the supervisor or client before cleaning begins,” he says. “Set the expectations in the customer’s mind about what you can and cannot do. If you inspect, document and communicate ahead of time, you can avoid 95 percent of the problems you might have with that supervisor or client.”

And then, says Griffin, building service contractors can figure out which cleaning process will deliver the best results with the least chance of a negative impact. – See more at: http://www.cleanlink.com/cp/article/Top-Carpet-Cleaning-Mistakes-For-BSCs–20257#sthash.A2EzRpmA.dpuf

Proper Steps To Clean Carpets, Bend OR

This is part two of a three-part article.

Regardless of what carpet cleaning method a facility uses, the “more is better” mindset is still prevalent in many custodial departments and can be detrimental to both the appearance and longevity of the carpet. Excess cleaning chemicals can exacerbate re-soiling, while oversaturating the carpet can causes odors and even mold issues.

“In the past the thinking has been ‘more is better’ — and I’ve been guilty of this, too,” admits McGarvey. “But when we load these carpets up with chemicals, we tend to see resoiling happening more quickly, and it degrades the appearance of the carpet a lot sooner than it should.”

In addition to following equipment manufacturer’s instructions for chemical usage, consultants advise users to rinse chemicals from the carpet thoroughly following hot water extraction, as well as low moisture options — particularly when applying the cleaning product to the carpet via the machine’s tank. The same holds true for interim cleaning methods such as encapsulation.

“When you use an encapsulation system, it’s important to remove the compound because, if you don’t, it will take the dirt off your shoes and leave it in the carpet,” says Bigger.

Just as chemicals need to be removed thoroughly from the carpet after cleaning, custodians need to recover as much water as possible from the carpet and avoid over-wetting it — a mistake that often occurs when dealing with high-traffic areas or stubborn stains.

“Make sure that you get the carpet dry, preferably in four to six hours,” says McGarvey. “Beyond 24 hours, you run the risk of mold growing.”

Air movement and carpet blowers can help to speed up the process, but staff should also check that carpet equipment is in good working order. A clogged vacuum, for instance, may not recover water properly, resulting in longer dry times. Jets should also be flushed on a regular basis to ensure that they don’t get clogged.

“A lot of times, custodians turn on the machine and hear the vacuum or pump and assume it’s working,” says Griffin. “But just because it’s making noise doesn’t mean it’s working properly. You want to inspect it regularly to make sure you’re getting proper flow of the jets and proper suction of the vacuum.”

In addition, tanks should be emptied and rinsed after each use and allowed to air dry to avoid odor problems caused by bacterial growth.

– See more at: http://www.cleanlink.com/hs/article/Proper-Steps-To-Clean-Carpets–20699#sthash.pd508NPA.dpuf

HARNESS THE POWER OF OZONE FOR CLEANING AND RESTORATION PROJECTS, Bend OR

HARNESS THE POWER OF OZONE FOR CLEANING AND RESTORATION PROJECTS, Bend OR

A technical video tip on how ozone works and why cleaning and restoration pros must harness the power of ozone to obtain superior results.

Using ozone for cleaning and restoration projects is a key component for success. Using ozone and understanding how it really works can also be confusing. In this video technical tip, David Hart of RamAir and OzoGen provides valuable details on what ozone is, how it is created and how technicians can harness its power and use it on their jobs.